In this article we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques that you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the house, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it is actually quite simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you will need to cut around the edge of the mask so that you get something that looks like a cone. The main thing here is to be realistic with what kind of paper plate which you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so that you can make certain that nothing will leak when you place the mask on. Make sure that the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to dog face mask spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t fret too much about the paint getting stuck to your mask. It’s easy to remove it later, and it will leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint after you’re done, so you don’t end up with smudges or smears on your dog.
Then it is time to glue the mask on your dog’s head. First you will need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you may begin to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and fold it over. Be certain it’s quite strong and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged securely onto the face of your dog. Do not make the folds too large or else it could look messy. As soon as you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Be sure the ears are flat and be certain it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.
If you are using a dog mask as your pet security, you’ll need to do some sanding to be certain it is safe on your dog. You can do it by sanding off any excess paper that may have been eliminated from your mask.